• Mold making inspection (1)

    The control of the raw materials of the mold is carried out in the following aspects: Macro inspection The chemical composition is decisive for ensuring the performance of the steel, but the composition is qualified, and the steel properties cannot be fully explained. Due to the uneven organization ... read more

    Apr 04, 2019 Industry News
  • Mold making inspection (2)

    Evaluation of annealed tissue The purpose of annealing is to reduce the hardness of the steel, to facilitate machining, and to prepare the tissue for subsequent heat treatment. The annealed structure of carbon tool steel is evaluated according to the GB1298 first-level rating chart. read more

    Apr 13, 2019 Industry News
  • Mold making inspection (3)

    Carbide inhomogeneity Cr12 type Leysite steel contains a large amount of eutectic carbides in the structure. Carbide inhomogeneity has a very important influence on the performance of use, so the distribution of carbides must be strictly controlled. All in all, because the production objects of the ... read more

    Apr 19, 2019 Industry News
  • Extrusion mould

    It is a molding method in which a plastic in a viscous state is passed through a die having a specific sectional shape at a high temperature and a certain pressure, and then shaped into a continuous profile of a desired sectional shape at a lower temperature. The production process of extrusion mold... read more

    Apr 30, 2019 Industry News
  • General design rules for vacuum forming dies.

    The design of vacuum forming molds includes batch size, molding equipment, precision conditions, geometric design, dimensional stability and surface quality. 1. The size of the batch is used for experiments. When the mold output is small, it can be made of wood or resin. However, if the experimental... read more

    May 11, 2019 Industry News
  • General design rules for vacuum forming dies. (2)

    Geometric shape design, design, often have to consider the dimensional stability and surface quality. For example, product design and dimensional stability require the use of a female mold (female mold), but the surface requires a higher gloss product, but requires the use of a male mold (protrusion... read more

    May 17, 2019 Industry News